Produkty dla do silników (269)

Sealpvc SF 240 Bulb The Sealpvc SF 240 Bulb waterstop is a waterproofing PVC profile that is not hydro-expansive, having a thickness of 24 centimetres and equipped with a central and highly elastic bulb. It is used in dynamic joints for horizontal casting (slabs), in concrete structures, resting on the substrate beneath the reinforcement, in a position central to the casting. Given its particular composition, it can be cut with a sharp blade (cutter) and welded with simple heat welding tools, thus making it easier to create connections in the course of work. Waterproofing of dinamic construction joints between: raft foundation and the elevation wall, between two raft foundations, between two elevation walls, between the wall and floor, resting on foundations under the shoring. Bind with iron wire the side flaps of the waterstop to the steel plates provided, in order to position it and secure it in a central position with respect to the casting to be made. Proceed with the casting operations, ensuring it does not bend nor move from the seat identified. 1 m/m: Use Sealpvc SF 240 Bulb welding the two edges of different belts head to head using a leister (manual hot air welder). Roll 25 m

Sanaxil P - Therm Mineral paint for interiors and exteriors with potassium silicates, with strong adhesion characteristics on porous substrates, both for mineral combinations and for chemical bonds. It combines anti-condensation and insulating characteristics (thanks to the presence of 3M Glass Bubble hollow glass microspheres in the formulation) with strong resistance to mold and microorganisms (thanks to the natural alkaline pH of potassium silicate) and excellent hiding power (class 1 according to EN 13300 for a yield of 6/7 m2 / l). Sanaxil P - Therm due to its mineral nature, revolutionizes the concept of adhesion to the substrate, penetrating deeply into the porosity of the wall and then reacting with its components and forming a unique and indissoluble silicate bond. The product does not form a film, thus avoiding detachment and flaking phenomena and, while ensuring excellent water repellency, ensures high values of permeability to water vapor thanks to its porous and microcrystalline structure, perfectly compatible with mortars, plasters and all other common elements of the body masonry. Physical-mechanical performance and durability are coupled with a vast choice of colors that cannot be altered over time; characteristics which, combined with the ease and practicality of application, make the product extremely versatile and adaptable to any project requirement. Protective, restorative coatings with strong antibacterial and anti-mold characteristics, based on stabilized potassium silicates, for vertical and horizontal surfaces. Heat reflective paint that helps to increase the thermal efficiency of the building. SUPPORTS ALREADY PAINTED WITH SILICATE PAINT Remove any stains and proceed with painting with the silicate paint. (it is always recommended to apply a coat of silicate impregnating agent). NEW SUPPORTS Apply a coat of potassium silicate fixative diluted from 30/40% with water depending on the absorption of the support. OLD SUPPORTS On old supports, remove the old paint by brushing, fill in any holes or imperfections in the wall with a suitable filler, proceed with fixing with potassium silicate impregnating agent diluted 30/40% with water depending on the absorption of the support. DILUTION (in volume with potable water) 1st COAT BRUSH: 15% one coat crossed or two coats 12-24 hours apart ROLLER: 10% SPRAY (with specific equipment): 15 - 25% 2nd COAT BRUSH: 10% ROLLER: 10% SPRAY (with specific equipment): 15 - 25%. Apply from 0.18 to 0.25 litres of Sanaxil P-THERM per square metre of surface to be painted. Pail 4 l - Pail 14 l

Sanavel Breathable, natural, non-toxic, indoor paint, based on potassium silicate. Mineral-based, active formulation, high mildewcide and anti-condensation performance, prepared according to traditional recipes, for use in ecological building interventions, new buildings and in the restoration of vintage buildings and monuments. Sanavel consists of potassium silicate, natural pigments. It has very high breathability, remarkable mildewcide and antibacterial properties. It has no solvents, thinners, harmful substances and toxic emissions in general, and does not have thermoplastic effects. Restoring and decorative paint for interior environments. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc. Pre-existing paints (washable, organic, solvent based etc. ) must be thoroughly removed. Preliminarily treat the support with the fixative Sanaxil Fix. Apply by brush, roller or spray. Sanavel is "dust-free" (it has started to be consistent to the touch) after about 1 hour. It can be overcoated after 4-5 hours, while it will be dry in-depth after 10-12 hours. Apply from 0.30 to 0.40 liters of Sanavel per square metre of surface to be painted. Pail 4 l - Pail 14 l

Sanastark Reactive solution of mineral silicates, capable of forming binding and stabilizing compounds for hardening and consolidating treatments by reaction with hydrated calcium salts and moisture present in masonry, plaster, stone and concrete. Indicated in the preliminary treatments to the subsequent plastering or smoothing operations, of plasters and powdery mortars and wall casings in general, in green building interventions and in the restoration of period and monumental buildings. Sanastark is a solution based on mineral silicates, demineralised water and natural dispersant. It does not contains traces of resins, solvents or thinners. The application of Sanastark does not affect the original wall breathability. Cortical reinforcement and elimination of pulverisation of mortars, plasters and masonry jointing. Also suitable as a natural fixative before applying lime putty- or potassium silicate-based plasters and paints. Remove the soilings and saline manifestations by vigorous brushing. Then eliminate the residual dust. Saturated with water until you reach the condition of "saturated with dry surface". Apply by spraying, proceeding from the bottom up: it can also be applied with a brush with natural long bristles. In the presence of pronounced degradations proceed with several applications, wet on wet. From 0.20 to 0.30 kg of Sanastark for each square metre of surface to be treated, based on the porosity of the support. Plastic can 5 kg - Plastic can 10 kg - Plastic can 25 kg

Sanalit Fiber-reinforced premix, based on hydraulic lime, light aggregates with high communicating porosity and cork flours, for the realization, with the sole addition of water, of screeds and lightweight substrates, with high thermal and acoustic insulation, in green building interventions and in restoration of period and monumental buildings. Sanalit screeds, packaged according to the specifications shown in this technical data sheet, are classified C5-F1-A22 in accordance with European standard EN 13813. For laying subbase screeds in high performance thermo-acoustic ecological buildings. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface". Pour about 2/3 of the mixing water into the mixer. Gradually add Sanalit and the water still needed, by mixing until a homogeneous lump-free mixture of the desired consistency is obtained. Support the product at the reference height and float until a smooth and planar surface is obtained, preparing the joints beforehand where necessary. The mixing water indicatively necessary is equal to 65-75% by weight (8.5 -9.5 litres per 13 kg bag). Approximately 6 kg/m² of Sanalit for every centimetre of thickness to be implemented (approximately 600 kg per cubic metre). Bag 13 kg - Pallet: 50 x (Bag 13 kg)

Sanadek Breathable, natural, non-toxic paint, for internal use, diffusive type, based on long hardening lime putty, prefiltered. Mineral-based, active formulation, high natural anti-mildew and anti-condensation capacity, prepared according to the traditional recipes, for use in ecological building interventions and in the restoration of vintage buildings and monuments. Product based on lime putty and natural pigments. Sanadek has high breathability, it has remarkable mildewcide and antibacterial properties. It has no solvents, thinners, harmful substances in general. Decorative and interior renovation paint. The application supports will be free from fouling, powder, non-adhering parts, etc.; existing paints (washable, organic, solvent based etc.) must be removed. A preliminary fixative treatment of the surfaces is always advisable with a consolidating, transparent, Sanaxil Fix primer, based on potassium silicate. The application of Sanaxil Fix can be done by brush, roller or spray: the number of hands required and the dilution ratio with the most suitable water must be determined according to the conditions and absorption degradation of the supports. The admissible dilution range provides for water addition up to a maximum of 1:1 ratio. Apply by brush, roller, spray, in two coats, spaced-apart, one from the other, by about 24 hours. Apply from 0.30 to 0.40 liters of Sanadek per square metre of surface to be painted. Pail 4 l - Pail 14 l

Ringseal Pinza K4 Special dilating pliers with three noses, to facilitate the installation of the rectangular seals Ringseal L19 in a central position with respect to the metal blade caisson spacers for wood formwork. Expansion of elastic seals. Specific for the installation of the hydro-expansive rings Ringseal L19 on blade caisson spacers. Fully insert the nose of the pliers in the closed position in the slit of the rectangular gasket Ringseal L19. Press the handles of the pliers in order to dilate the seal. Install the dilated gasket at the centerline of the metal caisson blade. Release the pliers and pull them out of the seal. Product to buy as needed. Bulk material 1 unit

Repar Tix HG Bic Two-component thixotropic, structural, fibre reinforced cement mortar, with compensated shrinkage, with high intrinsic water tightness, and extraordinary physical and mechanical characteristics: adhesion, compression resistance, flexural strength, abrasion resistance, etc. Modified polymer mortar, with the addition of component B liquid, provided in canisters, containing special polymers in aqueous emulsion and hygrometric shrinkage reducers. Perfect for remediation of structural works and articles in degraded concrete and very high-performance coatings. After mixing the two components, Repar Tix HG Bic is perfectly workable with manual methods or with spraying machines. The applied and hardened material will have very high adhesion, durability, impermeable to water, with good vapor permeability, high physical-mechanical resistance (class R4 according to UNI EN 1504/3). The product contains migratory corrosion inhibitors in its B component. The thixotropic characteristics of the product allow excellent adhesion and easy spreadability on vertical surfaces, on the lower parts of beams, shelves or slabs, often even on structures indirectly subjected to light vibrations or dynamic stresses during application. It solves the problems of complex reconstructions or restorations, even on difficult-to-grip substrates and for a wide range of applied thicknesses: from a minimum of 3 mm (to be spread with a blade and finished with a trowel) to a maximum of 100 mm. and beyond, naturally in succession of layers of 25-30 mm / each. (for large thicknesses on large surfaces it is always advisable to provide a contrasting net on connectors fixed to the support). It does not require wetting or anti-evaporation protection after application. The superpozzolanic reaction of the peculiar reactive fillers contained in component A, the three-dimensional micro-armor provided by a balanced mix of READYMESH fibers, together with the special polymers and migratory corrosion inhibitors contained in component B, guarantee the hardened product very strong adhesion to the substrate, dimensional stability and maximum durability to environmental aggressions (from carbonation, acid rain, chlorides, sulphates). • Repairs and protective coatings of hydraulic works (pipes, dams, tunnels, etc.), offshore structures and artefacts in critical situations: chemical-physical aggressions, leaching water, marine atmosphere, etc.; • structural restoration of pillars, beams, floors and walls in reinforced concrete, including prefabricated ones, subject to high sulphate aggression; • volumetric reconstruction and bulking of concrete products with thicknesses from 1 to 4 cm, without the need for electro-welded mesh (the surfaces in this case must be appropriately hydroscarified with a roughness level > 7 on the ICRI _ International Concrete Repair Institute scale); • restoration of the cortical layer of the concrete and repair of the concrete cover detached following the oxidation of the reinforcing irons. Application surfaces should be clean, free of dirt, crumbling and non-adhering parts, dust etc., and saturated with water "saturated with dry surface". An adequate roughening of the surfaces by scarifying, sandblasting etc. is always necessary in order to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Bare the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes). Pour component B (liquid) into a container (bucket or other) gradually adding and mixing component A (powder), continue mixing until total elimination of lumps. The optimal consistency of the product and the consequent physical-mechanical performances declared in this technical data sheet can be reached using 4.5 kg of COMPONENT B for each 25 kg bag. The excess quantity of COMPONENT B (0.5 kg) is particularly useful for priming the substrate, or for wetting the trowel in the final smoothing operation, or in hot and arid environmental conditions where the mixed product is kept at rest in the bucket it may require some light addition of liquid to regain its optimal consistency, thus avoiding uncontrolled water additions. Approximately 19,50 kg/m² of Repar Tix HG Bic for every centimetre of thickness to be implemented (approximately 1950 kg per cubic metre). Bag 25 kg [A] - Plastic can 5 kg [B] - Kit: 1 Bag 25 kg [A] + 1 Plastic can 5 kg [B]

Repar Tix GS A structural and shrinkage-compensated thixotropic cementitious mortar with a maximum aggregate grain size of 5 mm, consisting of high-strength cements, super-pozzolanic fillers, stabilising additives and high-tenacity polypropylene microfibres. The coarse grain of the aggregate and the excellent workability of the mortar render Repar Tix GS particularly suited to very thick volumetric structural restorations (with a depth of up to 50 mm per single coat applied) on reinforced concrete and masonry, even in environments with aggressive exposure (marine, industrial). It can be applied vertically or to the intrados of reinforced concrete structures, even of significant thickness, always in collaboration with the reinforcing rods, either manually or by spray, without the need for formwork and with wet curing for the first 48–72 hours. Repar Tix GS, the thixotropic structural mortar for significant thicknesses, can benefit from the addition of 0.25% of Fluid SRA, a special additive able to reduce both plastic and hydraulic shrinkage. Fluid SRA protects the curing of the mortar and, mixed with Repar Tix GS, can be considered as a technologically-advanced system able to reduce the rapid evaporation of water from mortar and promote the development of hydration reactions. Thanks to the interaction with certain cement components, Fluid SRA reduces final shrinkage by 20 to 50% compared with the standard values of Repar Tix GS prepared with the addition of water alone. For restorations, repairs, structural reclamations, reconstruction of concrete coverings, and the construction of reliable and durable coatings for construction, civil, hydraulic, industrial, concrete and masonry works in the event of extensive-thickness restorations. The applicative surfaces must be clean, free from contamination or any loose or detached parts, dust, and so on, suitably watered down until it is “saturated with a dry surface”. An adequate roughening of the surfaces by scarifying, sandblasting etc. is always necessary in order to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Bare the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes). It is recommended to apply Consilex San consolidating realkalising agent to exposed surfaces in advance, prior to their restoration. Add two-thirds of the total mixing water (about 2.5 litres per bag) to the concrete mixer then gradually add the product and the remaining water until obtaining the desired mixture with a homogeneous consistency free from lumps. Ensure exposed surfaces are protected and wet-cured. Adding Bond HG to the mixing water (about 0.5-0.7 kg per bag of product) offers significant improvements in terms of adhesion, adherence, waterproofing, workability, malleability and deformation capacity. Approximately 19 kg/m² of Repar Tix GS for every centimetre of thickness to be implemented (approximately 1900 kg per cubic metre). Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Repar Tix Bic Structural cementitious mortar, two-component, composite, with compensated shrinkage, fiber-reinforced, based on high-strength cements, super-pozzolanic fillers, water-dispersed polymeric resins, migratory corrosion inhibitors, anti-shrinkage additives, plasticizers, stabilizers and anticorrosion agents, selected aggregates, READYMESH microfibers in glass, with a high zirconium content, and multifilament polypropylene. After mixing the two components, Repar Tix Bic is perfectly workable with manual methods or with spraying machines. The applied and hardened material will have very high adhesion, durability, impermeable to water, with good vapor permeability, high physical-mechanical resistance (class R3 according to UNI EN 1504/3). The product also has a particularly low elastic modulus and contains migratory corrosion inhibitors in its B component. The thixotropic characteristics of the product allow excellent adhesion and easy spreadability on vertical surfaces, on the lower parts of beams, shelves or slabs, often even on structures indirectly subjected to light vibrations or dynamic stresses during application. It solves the problems of complex reconstructions or restorations, even on difficult-to-grip substrates and for a wide range of applied thicknesses: from a minimum of 3 mm (to be spread with a blade and finished with a trowel) to a maximum of 100 mm. and beyond, naturally in succession of layers of 25-30 mm / each. (for large thicknesses on large surfaces it is always advisable to provide a contrasting net on connectors fixed to the support). It does not require wetting or anti-evaporation protection after application. The superpozzolanic reaction of the peculiar reactive fillers contained in component A, the three-dimensional micro-armor provided by a balanced mix of READYMESH fibers, together with the special polymers and migratory corrosion inhibitors contained in component B, guarantee the hardened product very strong adhesion to the substrate, dimensional stability and maximum durability to environmental aggressions (from carbonation, acid rain, chlorides, sulphates). For any type of repair or restoration on deteriorated concrete and masonry. Restoration, structural recovery, reconstruction of the concrete cover, construction of reliable and durable coatings of civil, hydraulic, industrial, concrete and masonry building works, even in particularly aggressive exposure environments (XC2, XC3, XC4, XD1, XD2, XD3, XS2, XS3, XA1, XA2, XA3, XF2, XF4). Application surfaces should be clean, free of dirt, crumbling and non-adhering parts, dust etc., and saturated with water "saturated with dry surface".. An adequate roughening of the surfaces by scarifying, sandblasting etc. is always necessary in order to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Uncover the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes). Pour component B (liquid) into a container (bucket or other), gradually add and mix in component A (powder), continue to mix until the mixture is totally lump-free. The optimal consistency of the product and the consequent physical-mechanical performances declared in this technical data sheet can be reached using 4.5 kg of COMPONENT B for each 25 kg bag. The excess quantity of COMPONENT B (0.5 kg) is particularly useful for priming the substrate, or for wetting the trowel in the final smoothing operation, or in hot and arid environmental conditions where the mixed product is kept at rest in the bucket it may require some light addition of liquid to regain its optimal consistency, thus avoiding uncontrolled water additions. Provide reconstruction thicknesses in the range 3 to 30 mm; for greater thicknesses add 3-6 mm gravel (add up to 30% by weight of the initial compound). High coating thicknesses, static monolithic requirements, etc., it may be necessary to resort to appropriate reinforcements (electrowelded mesh etc.) anchored to the support with Syntech Profix or GROUT MICROJ or Repar Tix G2. Approximately 20 kg/m² of Repar Tix Bic for every centimetre of thickness to be implemented (approximately 2000 kg per cubic metre). Bag 25 kg [A] - Plastic can 5 kg [B] - Kit: 1 Bag 25 kg [A] + 1 Plastic can 5 kg [B]

Repar Tix Structural, thixotropic, rheoplastic, composite cement mortar, based on high-resistance cements, superpozzolanic fillers, polymeric modifiers, anti-shrink agents, plasticisers, stabilisers, anti-corrosive, anti-allergic additives, selected aggregates, polypropylene fibres. Restorations and repairs, structural recovery, reinforcement reconstruction, construction of reliable and durable coatings for building, civil, hydraulic, industrial, concrete and masonry works. Application surfaces should be clean, free of dirt, crumbling and non-adhering parts, dust etc., and saturated with water "saturated with dry surface".. An adequate roughening of the surfaces by scarifying, sandblasting etc. is always necessary in order to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Bare the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes). It is advisable to previously to apply the realkalising reinforcement Consilex San on the exposed surfaces, before they are restored. Pour 2/3 of the total mixing water(about 3 litres per bag) in the concrete mixer, gradually add the product and the remaining water, until a homogeneous lump-free mixture of the desired consistency is obtained. Cure the protection and the prolonged moist hardening of exposed surfaces. The addition of Bond HG to the mixing water (at a rate of approximately 0.5-0.7 kg for each lot of product) allows substantial improvements in terms of adherence, adhesion, watertightness, workability, moldability and capacity of deformation. Approximately 19 kg/m² of Repar Tix for every centimetre of thickness to be implemented (approximately 1900 kg per cubic metre). Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Protech Sil Filler "Anti-crackling" basecoat based on siloxane water-thinnable resins, microfibre nylon, acrylic dispersions, fillers and specific additives, in a special highly water repellent mix ("lotus" effect). The special covering, filling (filler ) and vapour permeability capabilities, make it specific for renovating cracklings and small cracks, resulting from plastic and hygrometric shrinkage on existing plaster, before the next painting or coating with putty coat. The peculiar composition of Protech Sil Filler provides the performance of a real microporous filter, impervious to rain, it is exceptionally permeable to vapour: the "Sd" value is about ten times lower than that characteristic of normal acrylic paints. The product can then be applied on mineral media as well as on media treated with emulsion-based paints, providing a physical adhesion that is extremely permeable to vapour. Thanks to the physical structure of the binder, the silicone coating made with Protech Sil Filler, particularly resistant to light and weathering is even resistant to microorganisms. Renovation of vertical external façades characterised by significant presences of cracklings from shrinkage, also of width up to 1 mm. Regularisation of patches, of areas with different particle sizes and absorption. Particularly suitable for anti-cracking reclamation in buildings subject to protection as "cultural heritage". The support must be intact, dry and dust-free. Any biodeteriogenic settlements such as fungi, moulds, algae, lichens, etc. should be preliminarily tempered with specific products (CONSILEX ANTIMUFFA CLEANER and CONSILEX ANTIMUFFA). Where necessary it is necessary to provide suitable reinforcements with Sanastark. Static cracks exceeding 0.5 mm should be preliminarily filled with Fibrostuck. Apply at least 2 coats of Protech Sil Filler on the surfaces to be treated (about 125-150 g/m² per coat). It is recommended to "finish" the restoring treatment of the façade with the siloxane paint Protech Sil P. Apply from 0.35 to 0.60 kg of Protech Sil Filler per square metre of surface to be painted. Pail 25 kg

Protech Oxicrom Protech Oxicrom is an inorganic oxide/hydroxide based powder compound. Added in appropriate quantities and homogeneously distributed, it is ideal for the pigmentation of cement or similar conglomerates, plaster and paint. Protech Oxicrom oxides are available in yellow, red, brown, green, blue and black. Ferrous oxides have been used since ancient times for colouring paints. The main ferrous minerals from which the pigments are obtained are, of course, iron and its derivatives and compounds. The main colours of these pigments are dark gray/black in relation to ferrous oxide derivatives, and classic rusty red in relation to ferric oxide derivatives. Other more complex compounds may have colourings of yellow, orange, red and brown. Protech Oxicrom is ideal for the pigmentation of concrete for architectural and industrial floorings of washed gravel, shotcrete and exposed stone tiling, as well for the formulation of dyes and paints. The use of Protech Oxicrom ferrous oxide compounds is extremely simple: in the case of concrete, cements, mortars, plasters and so on, the pigment must be gradually and uniformly added to the mixer and mixed until a homogeneously coloured mixture is obtained. The indicative dosage of approximately 3-10% of the weight of the mixture to be pigmented should be varied according to the desired colour intensity. Add from 1 to 10% of Protech Oxicrom on the weight of the binder present in the mixture to the desired colour intensity. Bag 25 kg

Microsil 90 Grigio Selected grey silica fume for the production of high density and high performance conglomerates (waterproofness, chemical stability, mechanical strength etc.), for packaging sulphate-resistant, anti-leaching mortars, plasters, grouts and concretes. Microsil 90 Grigio consists of high purity (greater than 90%) silica fumes , selected, processed and bagged. Silica fume, the only component of Microsil 90 Grigio, is created spontaneously during the production of silicon steel (special and limited production). For all intents and purposes, therefore, silica fume is nothing more than particles of SiO₂ released during machining processes of silicon metal and iron-silicon alloys, in the form of very fine powder with vitreous structure (amorphous silica at 90-95%). These micro-granules, purified and selected, have a variable size between 0.01 and 1 μm, therefore much finer than cement granules, and are characterised by very high pozzolanic reactivity. Silica fume has been used now for over than 40 years all over the world for the fundamental improvement of rheological and performance characteristics of concretes, mortars and special plasters where they are introduced. Production of sulphate-resistant, sulphate-resistant, anti-leaching mortars, plasters, grouts and concretes , high performance in terms of watertightness, mechanical resistance, chemical resistance etc., in the realisation of civil engineering and hydraulic structures and works in marine, mountain, urban atmospheres etc. Microsil 90 Grigio must be poured into a concrete mixer subsequently to other solid components of the mixture: cement and aggregates. After mixing for about 30 - 45" add the mixing water, where possible with the addition of Fluid S, continue to mix until a strictly homogeneous mixture is obtained. Prepare test mixtures in order to determine the most suitable mix. From 10 to 30 kg of Microsil 90 Grigio for each cubic metre of concrete to be made. Bag 20 kg - Big bag 1000 kg - Pallet: 50 x (Bag 20 kg)

Grout Micro Fix The high-performance pourable micro-mortar Grout Micro Fix is a premix specifically intended for reinforced injection with the "sock" technique used for the consolidation of wall structures. Its particular composition has been designed to work in perfect coupling with the sealing sock and the threaded bars of the system, thus guaranteeing the main performance requirements required for this wall consolidation technique: easy mixing, high fluidity, injectability through the pipes injection even for long stretches, sufficient workability time, excellent mechanical performance even at short curing times. Grout Micro Fix achieves fluid and hyper-fluid workability even with very low water/cement ratios (< 0.4). thus resulting perfectly homogeneous, pourable, self-levelling and without water exudation phenomena. The very fine grain size of the aggregates allows the perfect filling of particularly narrow spaces and discontinuities (< 0.5 cm). The capillary absorption of the applied micromortar is very low, allowing great resistance to freeze-thaw cycles and washout. Grout Micro Fix achieves very high mechanical performance and is rich in microsilicas with pozzolanic activity and special additives which make it extremely durable even if positioned in particularly aggressive environments (due to chloride contamination in marine atmospheres). It is resistant to sulphate attack (Anstett test passed). The very fine binders, in combination with the special additives contained, allow Grout Micro Fix to develop exceptional values of adhesion to the steel and resistance to slipping of the bars with improved adhesion. When anchoring steel bars, the advantages of using Grout Micro Fix are: application also on damp supports (a situation that often limits the use of traditional structural resins); high resistance to high temperatures (for example in the event of impact and fire) thanks to the nature of the anchor. Reinforced injections for wall consolidation with the "sock" technique. Anchoring and fastening of bars with improved adhesion, threaded bars, recovery bars for integrative castings, tie rods, connectors (metal or GFRP). Filling of structural cracks on concrete and masonry with crack width > 5 mm. Drill the masonry with a diamond core drill (the diameter of the core varies from 50 to 80 mm depending on the diameter of the threaded bar to be inserted). Blow with compressed air and vacuum the dust from the hole. Mixing the micromortar Pour 2/3 of the total mixing water into the concrete mixer, gradually add the product and, subsequently, the remaining water, mixing until a homogeneous mixture of the desired consistency is obtained. Grout Micro Fix can be mixed with different consistencies, from plastic to self-levelling pourable. With 12-13% of water (3.0 – 3.25 lt/25 kg bag) plastic consistencies are obtained, with 13-14% (3.25-3.5 lt/25 kg bag) consistencies pourable, with 14-16% (3.5-4.0 lt/25 kg bag) self-levelling fluid consistencies. Small volume doughs can be mixed with a double/triple helicoid whisk equipped with a speed regulator. Install by injection or pouring within 60' 30' of packaging. If the temperature, at the time of application, is between 0 and 5°C, the development of mechanical resistance will be slower. It is recommended, with cold temperatures, to use lukewarm mixing water between 20 ÷ 30°C. If the temperature, at the time of application, is between 30 and 35°C, it is advisable to use low temperature mixing water (5 ÷ 10°C) and to apply the product during the least hot hours of the day (approximately morning or evening). Creation of the sock system Place the sock system inside the hole, making the injection tubes come out. Proceed with mixing the mortar and pumping through the injection pipe until it is completely filled. Use approximately 1,800 kg of Grout Micro Fix for each cubic liter of volume to be filled. Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Grout 6 R3 Grout 6 R3 is a pourable, shrinkage-compensated, accelerated setting and hardening cement grout, which acquires its fluid consistency by mixing the premix with water through effective mechanical mixing. Its fluid consistency makes it pourable into appropriately prepared locations, without the risk of segregation of the aggregates and the emergence of mixing water (bleeding). The progression of mechanical resistance begins approximately 60 minutes after installing the product, making the product particularly suitable in all those operational areas where rapid development of mechanical performance and easy, fast and productive installation are required. Grout 6 R3 has a workability time of approximately 30', after which the accelerated setting and hardening processes begin to develop. The grout can be walked on after less than two hours and, after 24 hours, it already develops mechanical compressive strengths greater than 15 MPa. The specific mass of the grout facilitates installation operations and allows for reduced product consumption, of approximately 1900 kg/m3, with a saving in the costs of the applied product. The particular composition and the special additives contained give the grout high mechanical performance even over long periods of time, impermeability to water and resistance to abrasion. Grout 6 R3 is particularly suitable for filling trench excavations for laying telephone and electrical cables, laying water and gas pipes, sewer pipes and similar operations as, thanks to its fluidity, it flows easily without the aid of particular manual or mechanical compactions inside the trenches, meshing with the roughness of the walls, without sagging, maintaining perfect dimensional stability over time. Filling excavations made in the ground after laying pipes, electrical and telephone cables. Restoration of industrial floors and road works that need to be reopened to traffic quickly. Fixing of inspection pits and sewer manholes. Fixing of concrete, wood and fiberglass poles for electricity, telephone and lighting lines. Bases for machinery and urban accessories. Remove dust and loose parts from the trench or the location where the casting takes place. • Saturate waste with water. • Wait for the excess water to evaporate; To facilitate the elimination of non-absorbed water from the support, use specific liquid vacuum cleaners or use compressed air. Mix Grout 6 R3 with 12% - 13% of water calculated on the weight of the premixed product. Grout 6 R3 remains workable for approximately 25 minutes at a temperature of +20°C. Pour Grout 6 R3 into the location to be filled. The fluidity of the product allows the filling of irregular, tortuous and distant excavations from the casting point, without particular vibration works. Finish the surfaces with a spatula. In the case of filling excavations that cross roadways, it is possible to proceed with the reasphalting of the area subject to the intervention, within approximately 12 hours of pouring. Castings in cold climate: Check that the support is not frozen. Mix the product with warm water. Store the product, before use, in a protected environment Castings in warm climate: Mix with cold water. Protect the fresh surface of the grout from rapid evaporation of water by using waterproof sheets for at least 24 hours, or by using Cruing Aid seasoning agent, or by frequent wetting. Approximately 19 kg/m² of Grout 6 R3 for each centimeter of thickness to be created (approximately 1900 kg for each cubic meter). Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Fluid S Superlubricating additive, defoamer, in aqueous solution, for concrete, mortars and grouts, either with cement or lime. Particularly suitable for concretes added with silica-fume, for the production of concretes with very high intrinsic watertightness. Fluid S, added to a correct mix of hydraulic binders, selected aggregates, MICROSIL 90 (thickened silica fume), and auxiliary fibres Readymesh PM-180 (multifilament polypropylene fibres) improves mechanical strength, watertightness, and overall hardness of the product. Reference standards for the product: UNI 8145 - ASTM C 494 B,D,G. Production of concretes, mortars, shotcrete, grout (cement- or lime-based), high workability (consistency class), reduced water/cement ratio, exempt from bleeding and segregation. Specific for manufacturing concretes with very high intrinsic watertightness (waterproof concretes). Fluid S must be added to the anhydrous components of the conglomerate, together with the mixing water; the dosage of normal use is in the range 1-2% by weight, relative to the weight of the binders. After the addition of the product, provide for adequate mixing in order to obtain a homogeneous mixture free of lumps. Fluid S effectively performs its superlubricating action in different mixing conditions: concrete mixer, truck mixers, vertical axis mixers etc. with normal means of transport: truck mixers, truck mixer pumps, stationary pumps, etc. Any overages must be preliminarily verified with test mixes. Fluid S is considered a neutral additive, i.e. it does not involve changes in normal times for gripping and hardening the conglomerate where it is inserted. Add 0,7 to 2,0 kg of Fluid S for each quintal of hydraulic binder present in the mixture. Plastic can 10 kg - Plastic can 25 kg - Pallet tank (IBCs) 1000 kg

Fluid CR Fluid CR is a powder additive for concrete, grout and pourable mortar, formulated with microlysyls with pozzolanic activity, hyperplasticising additives, expansive additives and special anti-segregation polymers. Mixed together with water and the anhydrous components of cement conglomerates (aggregates and binders), it significantly increases their performance, improving the characteristics both in the fresh and hardened state. The addition of the Fluid CR additive allows the improvement of various characteristics of the conglomerates, both in the fresh state and in the hardened state. In the fresh state: drastically reduces the water/cement ratio; makes the mixture anti-washout therefore advisable, often indispensable, in castings in the presence of water (both fresh water and sea water) inside the formwork; avoids segregation and bleeding phenomena (separation of the mixing water); improves the workability of the casting, both in plastic and fluid consistencies, reaching self-compacting workability; In the hardened state: increases mechanical performance in compression, bending, traction, abrasion; it drastically reduces porosity, increasing the compactness of the casting and waterproofing, resulting in the creation, with appropriate mix designs, of intrinsically waterproof concrete; increases the chemical-physical resistance and consequently the durability of the conglomerate; the slightly expansive characteristics, induced in the conglomerates by the special additives contained in the formulation, allow the drastic reduction of shrinkage phenomena and pre-compression of the reinforcing bars. Fluid CR is perfectly compatible and synergistic with all our metallic and/or synthetic fibers from the READYMESH line. The introduction of Fluid CR in fibre-reinforced conglomerates increases the meshing between fiber and matrix, enhancing the mechanical performances induced by the fibrous components. Fluid CR is perfectly compatible and can be used with all types of Portland, Pozzolanic, Blast Furnace or Composite cement available on the market. Expansion prevented with dosages > 30 kg/m3 (UNI 8147): > 0.01% Increase in mechanical resistance: 10-30%. Production of concrete, grout and mortar: with reduced water/cement ratio; rheoplastic-rheodynamic; intrinsically waterproof; anti-leaching and free of segregation and bleeding. Application fields: industrial flooring; structures in contact with groundwater or sea water; underwater jets; structural reinforcements by casing nodes, beams and pillars in reinforced concrete; reinforcement of walls; sub-foundations and platings with slightly expansive characteristics. Fluid CR must be added to the anhydrous components of the conglomerate (binders and aggregates), together with the mixing water. In concrete mixing plants, it is recommended to introduce the additive after or together with the insertion of the aggregates and before the introduction of the cement. After adding the product, ensure adequate mixing in order to obtain a homogeneous mixture free of lumps. Adjust the mixing water according to the effect of reducing the w/c ratio induced by the formulation. As regards setting times, Fluid CR is considered a neutral additive, i.e. it does not involve changes in the normal setting and hardening times of the cement conglomerate in which it is inserted. From 15 to 80 kg/m3 depending on the intended uses. Recommended dosages: castings for industrial flooring: from 15 to 30 kg/m3 castings for structural reinforcements: from 15 to 50 kg/m3 castings with anti-washout characteristics: from 40 to 80 kg/m3. Bag 25 kg - Big bag 1000 kg - Pallet: 50 x (Bag 25 kg)

Flangia con vite Insulation fastener plastic dowel (58 mm in diameter and 40 mm in length) with screw in corrosion-resistant galvanised steel (30 mm) for connecting ARMAGLASS STRUCTURA mesh in anti-detachment RINFOR SYSTEM 1 and 2. The dowel is characterised by its gripping surface with improved adherence, to be particularly light, manageable, durable and tensile-resistant due to the closing cap in the input hole of the SCREW FOR CONCRETE that facilitates the operation of shaving with mortars in the RINFOR SYSTEMS 1 and 2. The galvanised steel CONCRETE SCREW is particularly resistant to corrosion. Preventing slab detachment with a Flangia con vite is a robust and economical fastening component in the ARMAGLASS STRUCTURA network of the RINFOR SYSTEMS 1 and 2. Make a hole on the concrete joists of the slab respecting the minimum/maximum dimensions indicated in the Technical Specifications then insert the dowel into the hole and fasten with a CONCRETE SCREW. No less than 4 pieces per square metre when a Flangia con vite is used in the RINFOR SYSTEMS 1 and 2 to prevent slab detachment. Bulk material 1 unit

Barrier Tube D26 1 metre long stiff paper tube, supplied with 6 plastic closure caps, specific for water repellent resin injections for the construction of slow radial diffusion chemical barriers at the base of the walls, against capillary rising damp, in the brick, tufas, stone, and mixed masonry of various thickness. Creation of chemical barriers, even with the "diy" system, using the slow diffusion method. Draw a line parallel to the outside kerb or to the internal floor, at about 10-15 cm from the same. Prepare drilling points at 12 cm distance from one another on the line. The inclination of the holes should be about 20° down. The depth of the holes should be approximately 4/5 the thickness of the wall to inject. The tip of the drill should be slightly greater than 26 mm. Once the holes are finished, the dust produced by drilling is required to be eliminated. Apply the appropriate plastic plug provided on one of the two ends of Barrier Tube D26. Insert it into the holes perforated for the entire depth of the hole. Cut off the excess part of the tube that protrudes from the stonework with a pair of scissors or a utility knife. Close the tube with the other plastic plug provided. Drill the cap and insert the clear rubber tube connected to Barrier Bag. Fill the hole and the entrance of the tube with lime based mortar to prevent the escape of the water repellent resin. Product to buy as needed. Bulk material 1 m

Barrier Bag Graduated polyethylene bag, to be fixed by nailing to a suitable wooden or masonry stand, necessary for the chemical barriers against the capillary rising damp with the slow diffusion method. Chemical masonry cutting to put a final end to capillary rising damp. Secure the bag at about 1 metre height, relative to the pre-drilled holes for the injection of the chemical barrier resin, by nailing directly on the masonry, or preparing an adequate wooden support. The distance between bags will have to correspond to the distance between the pre-drilled holes. Connect the appropriate rubber provided with the bag itself. Insert the other end of the tubes directly into the holes provided for the chemical barrier, at the foot of the masonry. Pour the resin in the bags until they are completely filled. Refill the resin in the bags until the complete saturation of the relevant hole ("until refusal"). Product to buy as needed. Bulk material 1 unit

Readymesh MM-150 Fibres, obtained by the cutting of steel wire, with improved adhesion profile, for three-dimensional general structural reinforcement of cement-based conglomerates. The addition of Readymesh MM-150 significantly increases the mechanical performance of the structure in terms of toughness, ductility, fatigue, dynamic stress, shock, wear, tensile and shear strength and even post-cracking and damage behaviour. Readymesh MM-150 are particularly recommended for increasing ductility, toughness and thermal conductivity in concrete coatings for floor heating systems. General preparation of screeds, cements and fibre-reinforced concrete. Particularly recommended for compact prefabrications, thin concrete floorings and radiant floor heating systems. "Readymesh MM-150 fibres must be added to the concrete during mixing. It is recommended to pour the fibres directly onto the loading belt of the concrete mixer during the loading of the aggregates. Alternatively, it is possible to add them directly into the mixer after loading the concrete or into the onsite mixer. In this case, extend the mixing time by at least one minute (after a minimum of 3 minutes) for every m³ of packaged concrete in order to achieve optimal distribution. If using a 200-litre onsite mixer, add the fibres immediately after loading part of the aggregates and before adding the remaining parts. The typical dosage of Readymesh MM-150 fibres varies from 15 to 30kg/m³. Conglomerates with Readymesh MM-150 can be easily transported and used with pumps, joiners, vibratory finishing machines, roadway extruders (e.g. slipform paver), etc. These fibres are typically used in conglomerates that have an aggregate diameter not exceeding 10-15mm." Variable according to the type of work to be carried out and/or performance to be achieved. Bag 20 kg - Pallet: 50 x (Bag 20 kg)

Syntech HAG Stabiland Product consumption depends on the size of the void volume to be filled and on the expansive reaction that is triggered after mixing the two components in relation to the amount of water present. Can 21.5 kg [A] - Can 24.5 kg [B] - Kit: 1 Can 21.5 kg [A] + 1 Can 24.5 kg [B]

Syntech Poliurea Primer – Epoxy SYNTECH POLIUREA PRIMER - EPOXY is a two-component primer based on modified epoxy resins and special hardeners, solvent-free. Specially formulated to provide the right compromise between impregnation and wettability of the support to which, once applied, it forms a well-bonded layer. Adhesion promoter for epoxy, polyurethane and polureic coatings, adhesion promoter for porous and deteriorated substrates, consolidating agent for cement and concrete. The support on which the polyurea or resinous system must be laid must be suitable for withstanding the stresses resulting from the intended use, such as static or dynamic loads, impacts, thermo-hygrometric dilations, vibrations, etc. As regards the characteristics of the substrate (maximum humidity, cohesion, strength class, flatness, etc.) and the preparation of the surface that will accommodate the resin system, we recommend the requirements set out in chapter 5 of the UNI 10966 standard ("RESIN SYSTEMS FOR SURFACES HORIZONTAL AND VERTICAL - INSTRUCTIONS FOR DESIGN AND APPLICATION "). In any case, carefully clean and degrease the surfaces, removing any kind of dirt, paint residues or incoherent parts. The humidity of the support must be <= 3%. Evaluate the most convenient type of mechanical preparation (shot peening, sandblasting, hydro-washing, etc.). The surfaces must also be free from discontinuity, and possibly leveled and regularized with products from the FLOOR line or the REPAR line. In case of presence (even suspected) of humidity deriving from capillary rising from the substrate, it is recommended to apply in advance the epoxy resin for "wet substrates" Syntech Pavidamp. Tiled floors, or floors covered with pre-existing resin, must be subjected to mechanical roughening carried out with shot blasting, milling, bush hammering, etc., until the total elimination of the waterproof crust and the opacification of the surfaces. Remove dust after abrasion. Carefully mix component A to allow the correct homogenization of the fillers present; then combine it with component B in a suitable and large container. Then mix the compound with a mechanical stirrer at low speed until a homogeneous mixture is obtained. When the support is ready, apply SYNTECH POLIUREA PRIMER - EPOXY using rollers, brushes or spatulas trying to obtain a dry film. From 350 to 700 g for each square metre, based on the intervention carried out on the support (bush-hammering, shot peening, etc.), the porosity of the support itself and the incorporation or not of quartz sand in the particle size and quantity proportionate to the intervention to be implemented. Can 20 kg [A] - Canister 4 kg [B] - Kit: 1 Can 20 kg [A] + 1 Canister 4 kg [B]

Syntech Poliurea Primer – Epoxy Metal Syntech Poliurea Primer – Epoxy Metal is a two-component primer based on epoxy resins free from solvents, used to promote adhesion, as a surface sealant for concrete, applied as a substrate for works with polyureas on metal surfaces and epoxy and polyurethane coatings. Adhesion promoter, surface sealant for concrete, to be applied as a substrate for works with polyureas on metal surfaces and epoxy and polyurethane coatings. The application must take place on a dry and degreased surface; the substrate must not have crumbly or detached parts and with a degree of humidity that must not exceed 5%. Preparation of the substrate may require some types of mechanical action: Smoothing, bush-hammering, shot peening, hydro-washing. Other mechanical actions that can make the support suitable. The individual components must be mixed carefully until a homogeneous mass is obtained. The material can be applied by roller, brush or spray by means of special airless machines, even in two coats. The temperature of the support must always be at least 3°C higher than the dew point temperature. Minimum application temperature +5°C, maximum temperature +35°C. Approximately 0,20 kg of Syntech Poliurea Primer – Epoxy Metal for every square metre of surface to be treated. Can 10 kg [A] - Can 5 kg [B] - Kit: 1 Can 10 kg [A] + 1 Can 5 kg [B]

Elastocap-ABC One-component coating based on acrylic resins in aqueous dispersion for permanent encapsulation of type A (visible outside), B (visible inside) and C (not visible, before confinement) of asbestos sheets , certified in accordance with the DM August 20, 1999. Elastocap-ABC is characterized by high flexibility, resistance to yellowing, adhesion and creates a waterproof and crack-resistant membrane. Elastocap-ABC is a product certified as being suitable for inertising Type A, Type B and Type C asbestos cement products. For visible or invisible permanent encapsulation of flat and corrugated roofing sheets and coverings containing asbestos fibres subject to degradation. If the surface is intact and only partially affected by the presence of mould and vegetation, it must be adequately suctioned using specific equipment, wet cleaned and treated with biocidal products to prevent dispersing the fibres into the environment and to permit the reclamation of the water used for washing. If the surface is particularly damaged or covered with mould and vegetation, it is necessary to inform the competent Local Health Authority by submitting an appropriate intervention plan. Cleaning in any case must be carried out with low-pressure water that is to be recovered in special containers for the subsequent disposal of the sediments. Any detached parts and waste are to be properly disposed of as asbestos waste. Always operate in compliance with current regulations on asbestos reclamation, occupational safety and environmental pollution. Apply a coat of Bond Plus for the impregnation of the substrate and the incorporation of asbestos fibres, preventing any dispersions in the environment. The use of primer also favours the adhesion of the encapsulating coating, to be applied after the primer has dried (about 30–40 minutes depending on the temperature). Bond Plus can be applied by spray (airless) with a consumption of about 100-300 grams/m2, depending on the degree of absorption of the substrate. Spray Elastocap-ABC onto clean and dry surfaces (at a pressure of 200–210 bar) once the Bond Plus is completely dry. The product can be diluted with 15% water to facilitate application. For TYPE A and B ENCAPSULATION COATINGS, application requires a minimum of two coats in different contrasting colours, waiting approximately 12–24 hours before the application of the next layer, in accordance with environmental conditions. A single coat of Elastocap-ABC is sufficient for NON-VISIBLE TYPE C COATINGS. The average and total minimum thicknesses required by current standards vary depending on the type of coating (see the table). The appearance of the underlying layer of cladding caused by environmental conditions and wear indicates a need to work on the surface once more to restore the encapsulant coating. A minimum 0.60 kilograms of Elastocap-ABC per square metre of surface is to be applied in two coats. Pail 20 kg - Pallet tank (IBCs) 1000 kg

Consilex Idrocon WV Water-repellent silicone consolidating product in aqueous dispersion, formulated for hydrophobing, anti-salt treatment and consolidation of absorbent mineral building materials, including alkaline ones. It does not cause chromatic variations or alterations in breathability. Material with very low VOC content. Works treated with Consilex Idrocon WV will benefit from improvements in terms of the prevention of saline efflorescence, mould, algae, lichens, and so on, along with a drastic reduction in chalking and a consolidation of the mineral composition of the masonry, as well as in the water-repellence of the treated surface. Consilex Idrocon WV is particularly suitable for: - Works in baked clay - Shingles - Bricks - Mortars, plasters and cement conglomerates - Plaster - Natural stones - Mineral materials for thermal insulation. Impregnating, waterproofing, protective, consolidating and alkalising treatment for absorbent materials. Consilex Idrocon WV comes ready for use and can be applied to clean absorbent mineral substrates by low-pressure spraying, roller, brush or total immersion. Apply the product homogeneously and evenly in one or more coasts, preferably without interruption or time intervals between one coat and the next, taking care to achieve the best saturation of the construction material. Apply Consilex Idrocon WV only on dry and clean mineral and absorbent media not affected by capillarity. Shielding just-treated items from rain is recommended until complete water repellence has developed. It is in any case advisable to perform preliminary tests on the surface to be treated so as to verify the optimal operating conditions. Due to the high alkalinity of Consilex Idrocon WV, it is essential to handle the product with care, wearing glasses, a mask, protective gloves and waterproof overalls. Consilex Idrocon WV is to be applied in accordance with the porosity of the substrate. Perform preliminary tests. Plastic can 5 kg - Plastic can 10 kg

Bentonet Trapezoid preshaped steel square mesh cage open only on one side, to be used to encourage correct positioning of the Clayseal 25.20 sodium bentonite waterstops, and to prevent the displacement from the seat provided, especially in complex situations or on surfaces which are not perfectly prepared. Once the joint is inserted, Bentonet will have to be fixed to the concrete support using steel nails and washers every 20-25 cm. Rigid construction joints (non-expanding) and connections with safe and permanent hydraulic seal. Prepare the smoothest and most planar laying surface, using Repar Tix to compensate for any inhomogeneity, and accurately remove crumbling, non-adhering, powdery parts. Spread the sodium bentonite waterstop Clayseal 25.20 in the designated position. Install the Bentonet joint locking cage above the Clayseal 25.20 hydro-expansive kerb. Fix it to the support by nailing: a steel nail every 20-25 cm approximately. The joints between the waterstop kerbs are sealed by simply flanking them by at least 10 cm and not by overlapping the ends. The positioning of the Clayseal 25.20 hydro-expansive kerb must ensure a concrete covering of 10-12 cm in order to contain the expansive action caused by hydration. 1 m/m : product to buy as needed. Bulk material 1 m - Box: 30 x (Bulk material 1 m)

Armaglass Pulbar ARMAGLASS PULBAR bars are pultruded bars made of E-CR glass fibre, known for its improved mechanical and durability characteristics compared to traditional E-glass, and impregnated with epoxy-vinyl ester thermosetting resin, thus guaranteeing perfect durability even in particularly aggressive where resistance to corrosion induced by chemical agents or stray currents becomes an essential requirement. ARMAGLASS PULBAR is sandblasted and spiral wound in order to ensure perfect adhesion to the concrete in accordance with the current qualification and design guidelines. Suitable for any type of joint between prefabricated elements, infills, bodies of different structures, partitions, doors and window frames, flooring. The insertion of a "joint base" filler material has many functions in both static and expansion joints: sizing the joint in the most appropriate shape and measurements for the characteristics of the sealant to be used, reducing the stresses internal to the sealant itself and on the adhesion to the walls; favouring the contact of the sealant with the side walls during joint filling; reducing sealant consumption. Sold in circular sections with a diameter equal to: 6, 10, 15, 20, 25, 30, 40 mm. 10, 15 and 30 mm sections are available ready to ship, other sizes are provided by request only. Filling the "joint base" for any type of joint between prefabricated elements, infills, bodies of different structures, partitions, doors and window frames, flooring, prior to laying the elastic sealant in the joint itself. The diameter of Filtene Fondogiunto should be about 25% greater than the width of the joint to allow a stable positioning of the profile and create sufficient resistance to the pressure exerted by the sealant during extrusion. Push with a tool with a rounded tip (free of sharp and pointy edges), capable of crossing the width of the joint, Filtene Fondogiunto, up to the desired depth and so as to leave on the surface an adequately deep seat for the subsequent sealant. Normally the depth of the sealing should be about half the width of the joint. Polyethylene foam is unaffected by solvents contained in the primers, but it is a good idea never to apply the adhesion promoter Protech Flex Primer on Filtene Fondogiunto, in order not to alter the anti-adherence properties. FILTENE can then be inserted into the joint after applying the primer, when the "dust-free time" is attained. Product to be purchased as needed. Bulk material 1 unit

Syntech HAG Acryl Syntech HAG Acryl is a four-component resin that reacts to form an elastic and durable gel. The properties of Syntech HAG Acryl are: • Good general chemical resistance. • Does not contain acrylamide, methacrylamide, formaldehyde or solvents. • Not inflammable. • Excellent adhesion on mineral building materials such as concrete, cement and bricks. • The reaction speed can be adjusted from a few seconds to several minutes. • When the injected cracks dry out due to temperature or groundwater level fluctuations the gel does not crack easily. • The hardened gel has excellent durability in wet-dry cycles. Syntech HAG Acryl components are supplied ready to use. Create 2 mixes in separate plastic buckets. Prepare only the quantity to be used each time. Solution 1: Syntech HAG Acryl component A (25 kg resin) mixed with Syntech HAG Acryl component B (2.5 kg catalyst). Solution 2: Syntech HAG Acryl component C (2 packs of 0.625 kg) mixed with clean tap water. Attention: The amount of water must be equal in volume to solution 1. When mixing resin, always use a wooden or stainless steel spatula. The reaction time depends on the temperature of the material, the structure of the building and the possible amount of water present. Higher temperature will speed up the reaction time and lower temperature will slow it down. It is advisable to carry out an on-site test, before injection, to observe and define the reaction time. To change the reaction time, only adjust the amount of Syntech HAG Acryl component C. The amount of the other components remains the same. Use a two-component stainless steel pump (manual, electric or pneumatic). Check that the pump and equipment are clean and that there is no residue from previous injection work. The two mixtures are fed into the pump separately, but are mixed homogeneously at a volumetric ratio of 1:1 in the pump's mixing head, before being injected through the pump nozzle. Check the quality of the concrete, as injection involves pressure. Sealing and waterproofing of cracks and cavities in walls, floors, concrete constructions, underground structures, etc. It can be used in constructions that are not permanently in contact with water (fluctuating groundwater level). Injection of very fine cracks. Determine the type and size of packers based on your pump and injection type. If reinforcing steel is present, try to locate it and plan the drilling pattern so that the reinforcement is not drilled. Drill holes at an angle of approximately 45° or less and in the direction of the crack. Make sure the hole goes through the crack. The distance of the drilled holes depends on the width of the crack. Place the packer in the hole. Prepare the pump to start the injection. The injection pressure varies depending on the structure and size of the crack. Start the injection at the lowest point of the crack. Continue injecting until resin flows out of adjacent packer(s). This is necessary to achieve uniform distribution of the material. Stop pumping, unplug and move on to the next packer. Continue the procedure until the crack is completely filled. After the material has cured, the packers can be removed. Holes drilled can be covered with Repar Tix Speedy HP quick-setting mortar. Clean and rinse the pump equipment with water whenever there is a stoppage longer than 15 minutes and, after completing the injection, rinse with a sufficient amount of water. Make sure the pump is clean and stop only when clean water comes out of the pump. The consumption of the product depends on the size of the empty volume to be filled. Can 25 kg [A] - Plastic can 2.5 kg [B] - Canister 0.625 kg [C] - Canister 0.625 kg [D] - Kit: 1 Can 25 kg [A] + 1 Plastic can 2.5 kg [B] + 1 Canister 0.625 kg [C] + 1 Canister 0.625 kg [D]